10 No-Sweat Tricks to Clean Any Type of Floor

Learning how to clean your floor properly is very important as it helps to keep the house looking clean and floor well maintained at all times. There are many different types of floors that are normally used in a house and different ways of cleaning each them. It is handy to have a how-to guide for cleaning your flooring, however, the most effective and common way of cleaning almost all type of floors is by using a vacuum proven to work well on tile floors as well as hardwood and carpet.

This is because the best vacuum for tile floors are well equipped to deal with all types of dirt, debris, and sludge or stains on your floor. Whether your floor is made of tile, cork, hardwood, or linoleum, it is essential to know how you would go about cleaning the floor using the best vacuum for tile flooring. Below are 10 simple and safe tricks that will help you keep any type of floor looking completely clean and new.

Hardwood floors will normally have either a wax or polyurethane finishing. If you are unsure what type of hardwood floor you have, rub your finger across the surface and if there is a smudge, then your floor is most probably waxed. Wood floors that are sealed will normally have a polycrylic, polyurethane, or urethane coating which helps to protect them from stains and damage from water.

Contrary to what most people will say, you don't need anything fancy to clean hardwood floors. For polyurethane hardwood floors, you only require soap and water. If there are tough stains on the floor, baking soda will be more efficient for cleaning and a decent microfiber mop will be helpful a well.

Wax hardwood floors can be damaged by even a small amount of water. Therefore, when cleaning this type of floor, dust mop, sweep, or vacuum regularly. Avoid using damp mops or rugs on the surface of these mops.

#2 Cork Floors

Cork floors normally look very appealing. However, the same quality of material used to make this floor appealing also makes it very vulnerable to damage from water. Most cork floors are sealed due to the fact that they absorb water and other liquids very easily but you’re still required to take extra care when cleaning. Try to vacuum the floor often so as to prevent it from getting any scratches, wipe any spills immediately, and wash it once a week using vinegar and soapy water.

#3 Linoleum Floor

A genuine linoleum floor is typically made from limestone, cork dust, wood fiber, resin, and oil and is colored with mineral pigments. This type of floor needs to be treated with care similarly to cork floors.

When cleaning, spray a mixture of hot water and dish soap to a section of the floor at a time and then wipe the area that has been cleaned with a microfiber mop that is slightly damp. The floor should then dry immediately under normal temperatures but if for some reason it still feels sticky, wipe it again with a cloth or damp microfiber mop.

#4 Laminate Floors

Most laminate floors look like planks or natural stone tile. However, it is important to remember that the floor is still a laminate and therefore, needs to be cared for accordingly. Fortunately, there are very few things capable of doing damage to a laminate floor since the planks have been constructed using highly resistant layers that enable it to maintain its appearance for years.

Therefore, it is very important to keep water from getting under the planks using a dry mop or the best vacuum for tile floors is a good way of ensuring that a laminate floor stays clean. If necessary, you can also clean the floor on the spot using a mop that is slightly damp.

#5 Natural Stone Floors

When cleaning natural stone floors, under no circumstance should you use vinegar or any other type of acidic substance such as ammonia or bleach. This is because these types of floors can easily get damaged when exposed to even a small amount of acid.

Instead, mop the floors using a cleaner that has a neutral PH and is non-ch-elating so as to ensure that the cleaning substance and the minerals in the natural surface of the floor do not react badly with one another. If the stone tiles on your floor happen to be unsealed, simply mop the floor using hot water and a microfiber mop.

#6 Bamboo Floors

Surfaces made from bamboo material tend to look very appealing and in some cases, they are softer and more vulnerable to scratches than hardwood floors. It is important to be extra careful when you are sweeping up dirt and debris on bamboo floors unless you have strand bamboo flooring, which is the most durable type of bamboo material that can be found.

Cleaning this type of floor is similar to the way you would clean a polyurethane hardwood floor in that you would mix soap and water in a bucket and then proceed to wipe the floor using a mop that is slightly damp.

#7 Vinyl Floors

Vinyl flooring is almost indestructible. For cleaning this type of floor, pour a 1/4 cup of vinegar in a spray bottle capable of carrying 16 ounces and then mix it with a drop of warm water and dish soap. Then proceed to spray the floor with the solution one section at a time as you wipe the moist areas with a microfiber that is slightly damp. If every once in a while you prefer to do a deep clean of the floor, use a steam cleaner to clean the grout and the tile.

#8 Carpet Floors

When deciding whether to use a carpeted floor, there are definitely several advantages and disadvantages. A carpet can easily add a feeling of warmth and liveliness any room. However, a carpet can also show dirt and stain very easily making them more difficult to clean than other types of floors.

Vacuuming a carpet regularly is a very efficient way to keep dirt and other types of grime and debris away. You should also try to make sure that the carpet is shampooed yearly. If shampooing your carpet seems to be too much, you can always hire a company that specializes in carpet cleaning to do the job for you.

#9 Ceramic Tile Floors

These types of floors are typically very durable and highly resilient and this separates them from other types of flooring. They are also quite easy to clean and maintain thereby making it a very popular choice for homes, offices, and other types of buildings.

To ensure that ceramic tile floors always remains in great shape always, you will need to regularly vacuum, sweep, and wipe the floor using a damp mop. The most efficient way to do this is by using the best vacuum for tile floors. Water is also a very effective way of keeping your ceramic tile floor looking clean and new.

#10 Marble and Granite Floors

Marble and granite floors are famous for their durability. However, it is important to know how to clean them properly. Cleaning marble or granite floors is actually quite easy. For spot cleaning, you will first need to apply a small amount of mild liquid dish washing soap to a soft microfiber cloth together with a small amount of clean water.

Next, gently rub the stain or scuff in the direction of the grain in straight lines while making sure that you do not scrub in a circular motion. Once the stain is completely gone, wipe the area with a dry cloth. For regular cleaning, start by filling a bucket with water and a small amount of dish washing soap.

Next, use a soft clean mop to wipe the floors using gentle strokes as you mop all over. Next, use cold and clean water to mop the floor once again so as to remove the soap residue. Finally, use a dry clean microfiber cloth to wipe off any water or moisture left on the floor

Author Bio:

Liz is a part of the Content team at Best Vacuum Expert, sharing expert knowledge and best tips on how to have a clean house.